skip to Main Content

DIESEL INJECTORS TREATMENT

Fuel quality can vary and its degradation, the water content and the addition of biofuels progressively deteriorate the injection system what can affect the system’s performance. The appearance of charcoal and varnish in the different components (injectors, EGR, intake valves, etc.) are indicators of a mediocre combustion level.

At Ecopower Additives, we are aware of the great importance of the injection system in the engines, helping them to reach their maximum optimization. An optimized injection system guarantees a lesser fuel consumption. The injector sprays the fuel more effectively by taking advantage of the explosion’s power during the combustion process what reduces the production of the CO2 emissions and increases the reliability of the wheel.

FOR INJECTORS AND VALVES

  • Ecopower Anti-friction cleans, purifies and lubricates injectors and valves. The injector sprays the fuel what optimizes its performance.
  • It extends the filter’s useful life and prevents clogging.
  • It protects the particulate filter as well as the intake, exhaust, turbo and EGR valves.
  • It eliminates the water particles, formed by condensation in the circuit and fuel tank, avoiding the appearance of bacteria and harmful agents.
  • It protects the components of the fuel circuit (such as: pressure pump, regulators, injectors, valves) against corrosion and rusting.
  • It helps you save money on maintenance and engine breakdowns.

A BETTER DRIVING EXPERIENCE

  • It makes easier the start engine.
  • It makes possible the original motor power recovery

ENVIRONMENT FRIENDLY

  • It gets rid of the coal and water sediments.
  • It optimizes the fuel and reduces its consumption.
  • It reduces the pollutant emissions.

Touring vehicles

  • Shock treatment:
    Mix a 400ml can content when the vehicle is on empty and drive around 30-40 km. Refuel, change the fuel filter and pour in some of our Ecopower CLEANING injection treatment.
  • Maintenance treatment:
    Pour ½ of the can content every time you refill the fuel tank. Once the can is empty, repeat the process after the next 9000 km.

Industrial vehicle

  • Shock treatment:
    Add a 400ml can content when the vehicle is on empty and drive around 50-70 km. Refuel, change the fuel filter and pour in some of our Ecopower CLEANING injection treatment.
  • Maintenance treatment:
    Pour 1ml of the can content per litre of fuel (1 litre per 1000 litres). In order to make the mixture more homogenous, pour the treatment liquid into the tank first and only then the fuel.
    In order to optimize the engine maintenance, repeat the process every 9000km.

Nautical and industrial machinery

  • Apply 1 litre per 1000 litres of fuel. Repeat every 200 working hours.

The most common uses:

  • Valid for all diesel engines. (For the diesel engines, common rail and injector pumps with dirt accumulated in the injectors as well as for those with an unstable idle having an excess of carbon in the combustion chamber, it is recommendable to start with the “shock treatment”).

Volumes disponibles:

  • 400 ml
  • 1 Liter
  • 5 Liters
  • 25 Liters

Light vehicle

Heavy vehicle

Agricultural vehicle

Nautical

Machinery

BUY ECOPOWER TREATMENT AND TAKE CARE OF YOUR VEHICLE

Close search
Basket
Back To Top